View all: Products

Enewall Primer

> Features & Benefits

  • Ensures uniformity of the finish
  • Bonding agent for acrylic and silicone based renders
  • Vapour permeable
  • About
  • Preparation & Application
  • Health & Safety
  • Downloads

Enewall Acrylic Primer is a ready to use vapour permeable liquid paint which is an essential base coat component for thin coat finishes. The primer improves the adhesion properties whilst ensuring colour consistency of the Enewall lightweight finishes.

> Technical & Supporting Services

Enewall’s Technical Services Department has a team of experienced advisors available to give on site advice both at the specification stage and during application. Detailed specifications can be prepared for individual projects. Site visits, on site demonstrations and training can be arranged on request.  For any technical enquiries please call Enewall main office on 01698 373 305 or via email on

> Preparation

Substrates must be free from dust, loose particles, damp and other pollutions; Primer should always be applied in the colour of the desired finished.

> Mixing

If required dilute with 5% (max) tap water.

> Application

Apply with a block brush or roller.  Do not use underneath ground level (foundation).  Do not apply when substrate/air temperature is below 5°C or above 30°C or if frost is expected. Protect areas before and after application.

> Coverage Rates

Approx. 350 gr/m2 In practice, fluctuations in coverage can be expected depending on type of substrate, dilution and application waste.

> Health & Safety

Please refer to health and safety data sheet

> Packaging


> Storage

Can be kept for approximately 1 year if stored in cool, frost‐free conditions and hermetically sealed,  protect from direct sunlight.